topic Re: connect bdv-n7200w and display tv and not.use in Home Cinema, Projectors & Players

connect bdv-n7200w and display tv and not.use

alvaror65 — Fri, 18 May 2018 14:39:53 GMT

Every time I connect my home theater to tv, tv appears and it does not let me go home. I have to turn it off for a long time and sometimes it goes home.then it appears not.use

Re: connect bdv-n7200w and display tv and not.use

Mick_D — Sat, 19 May 2018 19:02:35 GMT

Hi @alvaror65, welcome to the Community.

I'm not sure I fully understand your question, but if you are experiencing connection issues when you start up your home theatre system, try switching off the Quick Start option from the Bluetooth player menu.

You should also make sure you are running the latest firmware version. Have a look at the Downloads section of the Support page for your system; there is a comprehensive FAQ for troubleshooting the device on that page too.

Hope something there works!

Mick

Re: connect bdv-n7200w and display tv and not.use

Stewpotg — Sun, 12 Aug 2018 16:31:51 GMT

I experienced the very same issue today. The input was stuck at tv and when pressing the home button on the remote it would not respond. Selecting function on the remote would list the various inputs such as Bluetooth, audio, HDMI 1 etc however the player would not switch from t.v. mode. On the display when you selected HDMI 1 or blu ray it would say not.use. I restarted numerous times, including unplugging for 15 mins, still stuck on tv. Audio from the tv was playing through the player however if i turned the player off from the remote and then on again audio would no longer work despite being still on the the tv function. Unplugging would usually allow the audio to work again. After removing the optical lead and HDMI cable i plugged the HDMI cable back in and the system came back to life; however the issue returned shortly after. After performing the same steps above the menu system worked again. I then performed a factory reset, hopefully this will resolve the issue once and for all.

Any ideas what could be causing this?

Re: connect bdv-n7200w and display tv and not.use

Kkostaspap — Sun, 03 May 2020 08:16:10 GMT

Hello my friend, I have exactly the same problem!!!! Did u find a solution on that???

Re: connect bdv-n7200w and display tv and not.use

supraprince69 — Thu, 02 Jul 2020 04:45:35 GMT

I seem to have the same problem, except mine is stuck on audio. Has anyone solvd this dikema as yet please?

Re: connect bdv-n7200w and display tv and not.use

supraprince69 — Thu, 02 Jul 2020 04:53:27 GMT

Meant to DILEMA not dikema

Re: connect bdv-n7200w and display tv and not.use

7200ww — Tue, 16 Mar 2021 13:45:18 GMT

the simple storey is sony want you buy a sony tv so they make Shure the system will not work with anything else

Re: connect bdv-n7200w and display tv and not.use

ogoigwe — Tue, 30 Mar 2021 19:36:58 GMT

So I have been having exactly the same problem. Thank God I found this forum. Has anyone resolved this please , its becoming quite annoying. I have a Samsung tv. Is everyone that is having a similar problem using a non-sony tv?

Re: connect bdv-n7200w and display tv and not.use

7200ww — Wed, 31 Mar 2021 09:48:16 GMT

Hi Ogoigwe,
May thanks for the comment,
I hope someone out there has a fix?
As I, am sick of the hole of SONY none of the solutions they suggest work.
Kind regards

Paul
p.s. were in the world r u

Re: connect bdv-n7200w and display tv and not.use

ogoigwe — Wed, 31 Mar 2021 10:05:17 GMT

Hi Paul, I am in the UK. I went through the FAQs yesterday and it suggested switching off the Quick Start option from the menu settings which I did. It worked well last night. I will know if that's a permanent fix or not when I return home from work later today. This problem has been going on for the last 5 years🙄🤦🏿‍♂️, I just moved houses and I am determined to resolved it once and for all.

Re: connect bdv-n7200w and display tv and not.use

Joe_Dohn — Wed, 31 Mar 2021 12:43:54 GMT

@7200ww @ogoigwe

Does this happen on the latest software version as well?

- JD

Re: connect bdv-n7200w and display tv and not.use

7200ww — Wed, 31 Mar 2021 13:28:16 GMT

Good luck i,ve been trying for five years and it still don,t work

Re: connect bdv-n7200w and display tv and not.use

ogoigwe — Fri, 02 Apr 2021 17:32:19 GMT

UPDATE: So goodnews, I did what was recommended and for the last couple of days I haven't had any problems with the home theatre whenever I switch it on. Considering I have had it for 6 years and this is the longest spell i have gone without it causing me grief, that's progress ( my my where did all that time go)

Guys , you need to switch QUICK START MODE OFF.

Go to the Home theatre Menu>Setup>System settings>Quick start mode>switch it off.

That should solve the problem.

Let me know how that goes. Have a Happy Easter everyone

Re: connect bdv-n7200w and display tv and not.use

7200ww — Mon, 05 Apr 2021 09:31:16 GMT

Sorry guys it don,t work, still just the same.

Going to buy a SONY tv

Sick of samsung

Paul